模块

• 720212 High-speed 200 MS/s 14-Bit Isolation Module
• Max. sampling rate: 200 MS/s
• A/D conversion resolution: 14-Bit
• Max. input voltage (DC + ACpeak): 1000V / 200V

High-speed 10 MS/s 16-Bit isolation module (4 channels) – High noise immunity. Suitable for testing and longterm monitoring for power generators and multi-output power supplies. Provides dynamic analysis of multi-channel data recording applications. For use with the DL950 ScopeCorder.

Max. sampling rate:  10 MS/s
A/D conversion resolution:  16 bit
Number of channels:  4
Max. input voltage (DC + ACpeak):  600V / 200V

高速100ms /s 12位隔离模块(2通道)。采用IsoPRO技术，与探头700929或701947联合使用，可达到1千伏的隔离能力，专为逆变器/IGBT相关应用而设计。该模块采用高速光纤传输，实现了高速ADC时钟和数据隔离，并提供了开发高效逆变器所需的性能，除了具有12bit分辨率，这款2通道模块具有100MS/s的采样率，使其成为市场上最快的数据记录器之一。适用于DL350、DL850系列、DL950、SL1000。

• 720250 Voltage Module
• 10 MS/s sample rate
• 12-bit resolution
• 3 MHz bandwidth
• 2 isolated channels
• DL350, DL850, DL950, SL1000

• 720268 High Voltage Power Supply Module
• 300 kHz bandwidth
• 2 isolated channels
• Max input (DC+ACpeak) 1000V
• DC accuracy ±0.25%,
• DL350, DL850, DL950, SL1000

• 701261 Universal Module (2 ch)
• Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel)
• Applicable to DL350, DL850 series, DL950 and SL1000.

• Universal Module (with Anti-Aliasing Filter, 2 ch)
• Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), with AAF
• DL350, DL850 series, DL950 and SL1000

Temperature/high-precision voltage Module (2 ch)
Thermocouple (K, E, J, T, L, U, N, R, S, B, W, iron-doped gold/chromel), high sensitivity range (1 mV), and low noise (±4 µVtyp)
Applicable to DL350, DL850 series, DL950 and SL1000.

• The 720266 Temperature Module/Voltage Module
• 16-Bit, 125 S/s (Voltage) and 125 S/s (Temperature) sample rate
• DL350, DL850 series, DL950, SL1000

• Strain Module, NDIS (2 channels)
• 701955 or 701956 NDIS bridge head
• Detect/display mechanical stress with ScopeCorder
• DL350, DL850 series, DL950, SL1000

Strain Module with Shunt Calibration, type DSUB (2 channels) to be used in combination with 701957 or 701958 DSUB bridge head.
Using the strain module and strain gauge the ScopeCorder can detect and display mechanical stress (strain). It works on the principle that the resistance value of a metal foil changes as it expands and contracts.
Applicable to DL350, DL850 series, DL950 and SL1000.

• 2 channel Voltage Module/Acceleration Module
• Anti-Aliasing Filter 
• Direct input from built-in amp type acceleration sensor to measure acceleration 
• DL350, DL850 series, DL950 and SL1000.

• CAN FD/LIN监控模块
• 解码 CAN FD/LIN 总线信号，将物理数据信息显示为模拟波形，并与传感器数据进行比较。
• DL950（/VCE选件）、DL350（/VE选件）示波记录仪车辆版

• 701251 Analog Input Module
• High-Speed 1 Ms/s 16-Bit Isolation Module (2 ch)
• High sensitivity range (10 mV), low noise (±100 µVtyp), high noise immunity
• DL850, DL750, SL1000

High-Speed 10 MS/s 12-Bit non-isolation Module (2 ch)
Non-Isolation version of model 720250
Applicable to DL350, DL850 series, DL950 and SL1000.

760901 30A High Accuracy Element. Includes external sensor input.

760902 5A High Accuracy Element. Includes external sensor input.

使用AQ2200-221双端口功率计模块可以提高测试能力和功能。使用16台AQ2200-221可以同时测量32个端口。

• AQ2200-112 Light source module
• High output level stability performance
• AQ2200 Multi-Application Test System

AQ2200-131/132是用于AQ2200系列多应用测量系统的可调光源模块，AQ2200-131是单通道型，AQ2200-132是双通道型。可以为预设的DWDM Grid通道设置输出波长。

AQ2200-215是测量传输设备和光纤放大器输出功率的理想之选。

AQ2200-232是高性能光功率传感器头，AQ2200-202是连接AQ2200-232和AQ2200系列控制主机的接口模块。

轻型可变光学衰减器，提供低插入损耗。
可以使用SM、 GI50 和 GI62.5 等光学纤维模型

ATTN w/内置光功率计型
小巧轻便的光学可变衰减器。
可以使用SM、GI50和GI 62.5光学纤维模型。

AQ2200-411光开关模块小巧轻便，拥有极佳的切换重复性。

AQ2200-412光开关模块小巧轻便，拥有极佳的切换重复性。

AQ2200-421光开关模块小巧轻便，拥有极佳的切换重复性。

AQ2200-642将总线和功率控制功能组合到同一台主机中，可执行信号发生、BERT和光测试，降低了10G光收发器测试的复杂性和成本。

1000BASE-SX SFP module

1000BASE-LX SFP module

The AQ2200-212 is single channel sensor module with an analog output port.

Increase your testing power and capability with the AQ2200-222 sensor module.

For DL950,SL2000 multi-unit connection

10GBASE-ER XFP module

10GBASE-SR XFP module

10GBASE-LR XFP module

Current Sensor Element
Firmware version 3.01 or later of WT5000 main frame is required.